The 2nd 6th Special Technical Seminar on " Key Technologies for Production Casting by Lost Foam Process "
Lost foam casting, also known as negative compaction casting (EPC), is one of the more advanced casting technologies in the world. It is known as a revolution in the history of casting and is the "main way of green intensive casting" in the 21st century. The lost foam casting process is used more and more in the foundry production process in China, and the same problems with the lost foam casting technology are also increasing. Therefore, the lost foam is also known as "it will be discarded as soon as it is seen". Casting process, in order to improve the level of practical lost foam casting technology of casting enterprises, improve process control, reduce the rate of product scrap in the production process of casting enterprises, and continuously improve the coordination and stability of casting enterprises in quality, process and production. Yuan Dongzhou senior engineer, a senior casting technology expert, was invited to give a focused explanation on the practicality and selection of lost foam casting technology, white zone process technology control, pouring system design, the influence of coatings on casting defects, and lost foam casting workshop management.
I. Meeting time:
Training time: April 19, 2019-April 21, 2019
Enterprise leaders, quality supervisors, technicians, inspectors, etc.
Yuan Dongzhou (Higher Engineering)
u National Foundry Society Lost Foam and V Method Casting Technology Committee
Senior Foundry Engineer
◆ Over 50 years of lost foam casting production practice and experience accumulation, published nearly one hundred casting technical papers in national academic special issues and national professional academic conferences
◆ Currently serves as a technical consultant to a number of large-scale foundry and foundry suppliers;
◆ Special Editor of China Reform and Development Series Compilation Committee; Researcher of Academic Committee of China Academy of Management Sciences;
Why did you attend this course?
l Focus on solving common technical problems in the production process of lost foam castings;
l Focus on solving the process design problems of the lost foam casting casting system;
l Focus on solving the technical difficulties in the production of white areas of lost foam and coating applications;
l Focus on solving the quality, workshop and process production issues of lost foam production;
V. Course outline:
1. Yesterday, today and tomorrow of the lost foam casting process;
2. Basic knowledge of lost foam casting process;
3. Practicality and selection of lost foam casting process;
4. Technical control of the production process of vanishing white area;
5. Embedded design of casting system for lost foam casting;
6. Application of balanced solidification in lost foam cast iron parts;
7. Common defects and countermeasures of lost foam casting;
8. Lost foam casting quality control technology;
9. Technical management of lost foam casting production;
Conference fee: 1980 yuan / person Group purchase price 1800 yuan / person (3 persons or more)
Booth fee: 2600 Yuan / Booth
Including catering and information fees; accommodation will be arranged uniformly, and the costs will be borne by themselves (the standard bed is 190 yuan / day)
Meeting payment account:
Account Name: Liyang Zhongyi Electronic Technology Co., Ltd.
Bank: China Construction Bank Liyang Development Zone Sub-branch
Account number: 4100 1503 8100 5020 8868
Ø Venue: Daya Fangjin Hotel, Zhengzhou, Henan
Ø 100 meters east of the intersection of Beicheng Road and Fourth Avenue in Guancheng District
Ø Bus route: 1. Take the intercity high-speed rail from the airport to Zhengzhou East Station and take a taxi to the hotel at about 15 yuan
Ø 2.Take a taxi from Zhengzhou East Station to the hotel directly (15 minutes by car)
Ø 3. Zhengzhou Railway Station Option 1: Direct taxi fare is about 35 yuan Option 2: Take subway No. 1 to South Huanghe Road and taxi 10 yuan from South Yellow River Road (favorable and fast)